Multiple outlet points Firm PUF forming insulation USA standard components
Ranging from 100 to 300 L, Freestanding care series possess an extremely high range of sizes and matches all indoor installation requirements. This supports floor-standing. Thanks to its high standard production, its main electrical components like thermostat and T&P valve imported from USA well known brand.
FJI-PRO-S
Freestanding Commercial Water Heater
This electric water heater of freestanding care series, built to give long-lasting service, is suitable for prevalently commercial users. It is the ideal solution in situations where electrical power is cost efficient and convenient.Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (vitreous enamel on versions up to 500 litres,), ensure higher efficiency than similar products available on the market with the same characteristics of power. Electrical fittings consist in single-phase electrical heating elements of excellent quality,these heating elements can operate with single-phase 220 V power, or with triple-phase 220 V or 380 V power, coordinated by a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
1、ISOLATED STAINLESS STEEL TANK DESIGN REDUCES CONDUCTIVE HEAT LOSS
2、AUTOMATIC THERMOSTAT WITH OVER TEMPERATURE PROTECTOR CUTS OFF
3、G3/4” FEMALE INLET/OUTLET/DRAIN HOSE
4、HIGH EFFICIENT CYLINDRIAL SHAPE
5、HIGH PERFORMANCE AND LOWER OPERATINGCOST
6、IMPORTED INCOLOY 840/800 HEATING ELEMENT
7、TOP 7 BAR(150 PSI)&98℃(210 ºF) T&P RELIEF VALVE
8、MULTIPLE HOT WATER SUPPLY POINTS
2、AUTOMATIC THERMOSTAT WITH OVER TEMPERATURE PROTECTOR CUTS OFF
3、G3/4” FEMALE INLET/OUTLET/DRAIN HOSE
4、HIGH EFFICIENT CYLINDRIAL SHAPE
5、HIGH PERFORMANCE AND LOWER OPERATINGCOST
6、IMPORTED INCOLOY 840/800 HEATING ELEMENT
7、TOP 7 BAR(150 PSI)&98℃(210 ºF) T&P RELIEF VALVE
8、MULTIPLE HOT WATER SUPPLY POINTS
| Model | | FJI-PRO-100S | FJI-PRO-15 0S |
FJI-PRO-20 0S |
FJI-PRO-25 0S |
FJI-PRO-30 0S |
FJI-PRO-400S |
| Capacity | L | 100 | 150 | 200 | 250 | 300 | 400 |
| Power | KW | 1.5 | 1.5 | 2 | 2.5 | 3 | 4 |
| Voltage | 240 | 240 | 240 | 240 | 240 | 240 | 240 |
| Heating Time(△t=45℃) | Hrs. | 3.8 | 5.8 | 5.8 | 7.2 | 9 | 9 |
| Max working Temperatur | ℃ | 75 | 75 | 75 | 75 | 75 | 75 |
| Max Water Pressure | Bar/Psi | 7/150 | 7/150 | 7/150 | 7/150 | 7/150 | 7/150 |
| Product Size | L*W*H /mm |
470*Φ1060 | 470*Φ145 0 |
550*Φ134 0 |
580*Φ145 0 |
580*Φ170 0 |
700*Φ1560 |
| Temp Cutting | ℃ | 98 | 98 | 98 | 98 | 98 | 98 |
